PassMark BurnInTest 9.0 Build 1012

PassMark BurnInTest™ is a software tool that allows all the major sub-systems of a computer to be simultaneously stress tested for endurance, reliability and stability.

Assists in PC Troubleshooting and diagnostics.
Avoid delivering dead on arrival and faulty hardware to your customers.
Dramatically reduce your test times with simultaneous testing.
Build your image as a supplier of quality systems.
Avoid costly downtime, system rebuilds and lost data.
Test the stability of a system after configuration changes or hardware upgrades (critical for overclocking and system upgrades).
The hottest, fastest CPU Burn In tool around!

• Testing for hardware problems
• System information
• Test results and reporting
• Temperature reporting

• An easy to use interface. Configure, Run, Pass or Fail, Results report;
• The ability to select the level of load placed on each component;
• The ability to set detailed test parameters if and when required;
• Timed test runs that will stop automatically at the expiry of the selected time or after a number of test cycles;
• Support for production line automation;
• Can be run from a disk drive, USB drive or optical disk (under Windows);
• Can be made into a bootable solution from a USB drive, optical disk or PXE boot (with PassMark WinPE Builder);
• Testing of up to 256 CPUs simultaneously;
• Testing of up to 32 memory modules simultaneously;
• Testing of up to 50 disk drives simultaneously;
• Support for SMART hard disk parameter checking;
• Testing of up to 20 optical drives simultaneously;
• CD / DVD / Blu-Ray read testing using specialized optical test media, plus CD/DVD burner testing;
• Testing of up to 8 graphics cards (GPGPU test) simultaneously;
• Testing of up to 20 network ports simultaneously;
• Testing of up to 25 USB ports simultaneously;
• Windows shutdown and cyclic reboot testing (with complementary Rebooter software);
• Scrolling 'H's for Electromagnetic Compliance (EMC) testing to ANSI standard C63.4-1992;
• Native 32-bit and 64bit hardware and O/S support;
• Online help & PDF manual.

• Added outputting of PCIe statistics to trace activity level 1 log once per cycle
• Fixed a bug where saved report defaults (technician, customer, serial etc) could be cleared when the current results were cleared
• Made a change to the CPU heat test so that the SSE2 heat test checks for AVX CPU support as well as some AVX instructions being used (which caused a crash on old CPUs like the Core 2 Quad 6600)
• Fixed an issue with the TPM test where V2 TPMs might not be found correctly and throw a "self test failed" error
• Added a new error to the TPM test if the self test command is blocked by the operating system
• Fixed an issue in the DX12 3D test where if an error occurred during the render process it previously might not be displayed until the 3D cycle finished. Now an error will be flagged when the error occurs and the test will stop running.
• Changed behaviour of scrolling letter 2D test so it will continue to run when not in the foreground
• Added technician and customer details to management console connection message
• Changed editing of report details so when technician or customer is changed any current connection to the management console will be restarted (starting a new management console session)
• Increased size limit of system information details fields sent to management console
• Increased number of system information items sent to the management console from 16 to 25
• Fixed some possible array overflows that could cause a crash when generating the management console connection message
• Started signing installer with SHA256